When two colors meet in a corner apply tape, seal the edge with clear caulking, and remove the access with a finger, creating a barrier against paint bleed through.
Why does my interior paint rub off?
Paint manufactures sell low to high grade interior paint to be used for different situations.
Most building contractors in new home construction use low grade flat paint because they want to trim cost where they can, to increase profit margin.
Cheap paint contains fillers; powder, less vehicle; water & solvents and less binders; needed for adhesion of the coating to the wall and it holds the pigment particles distributed throughout the coating.
This allows for “clay like” coverage and hides sheetrock and texture imperfections. These ingredients are Aluminum silicates (clay)- that have been heated to drive off water, Calcium Carbonate (chalk)- low cost, low hiding pigment, Talc- general purpose extender and Diatomaceous Silicates-limit sheen. There is no ingredient in this low end flat paint to permit, rich color, durability or wash ability.
How does this affect an interior repaint project?
The flat low-end paint is very porous. Due to the porosity; the liquids (vehicle) of the new paint being applied are absorbed in some areas, more than others, leaving the binder partly exposed and an uneven finish. The color and sheen has a lot to do with the finished appearance as well, the higher the sheen, the more the sheet rock defects may appear. Including tape joints, uneven texture and nail pops; most commonly seen in stairwells and walls with direct light.
Caution: If you have applied paint samples to the walls, it is likely that those painted areas will telegraph through the finish coat. Why? Because those areas will have three coats of color and the remaining areas are only two, this is known as sheen build.
We rely on Benjamin Moore premium products for exacting performance. BM scientists have created paints that provide amazing benefits. The proprietary hybrid resin and ceramic coatings, provides durability, stain release and toughness with the aesthetic beauty of a matte finish. Premium paints provide excellent hide, for coverage and sheetrock imperfections, and durability for the active family.
Waterborne finishes, offered by Benjamin Moore are low to zero VOC’s because of the breakthrough ColorLock technology. The hybrid resin coupled with these waterborne colorants creates a luxurious finish and richer, truer color desired by discerning homeowners.
Interior Painting Woodinville, Interior Paint Woodinville, Paint Colors Woodinville, Exterior Paint, Room Colors, Paint, Painting in Woodinville, Home Decorating Ideas, Interior Decorating Ideas, Painting Contractors in Woodinville, Painting Companies Woodinville, Living Room Colors, Paint Colors, Paint Color in Woodinville, Interior Paint Colors Woodinville.
Call Today For A Free Consultation 425-488-1192 or Contact Us Here